Skip to Store Area:

Construction Equipment

You Are Here:

Search Site

InPower LVD-20-200-C-SPC201 Low Voltage Disconnect - 200 AMP

Zoom Out
Zoom In

More Views

Click on image above to view full picture

Low Voltage Disconnect - InPower LVD-20-200-C-SPC201

Model#: InPower LVD-20-200-C-SPC201

$183.33

SKU#: IP-LVD-20-200-C-SPC201

Add Items to Cart
  • | Add to Compare

    • InPower LVD-20-200-C-SPC201 Low Voltage Disconnect - 200 AMP


    The LVD-20 Low Voltage Disconnect automatically disconnects 12Vdc loads from the battery when the battery voltage drops below a critical level to protect the battery power. This leaves enough power for the vehicle to be restarted. The uni-directional design provides protection for single battery applications only. The output on the LVD-20 is over-current, short-circuit and loss of ground protected.

  • Operating voltage: 9.5Vdc to 18.5Vdc
  • Standard shut off voltage is 11.5 Vdc for 60 seconds, but time and voltage settings are available
  • Ground studs provided for control and input to contactor
  • Power studs are stainless steel 3/8-16 with locking nuts provided
  • Size: 2.85 W X 4.35 L X 1.10 H
  • Over-current trip: 100-110% of rated capacity for 500 milliseconds
  • Loss of ground trip: 250 milliseconds


    • InPower LVD-20-200-C-SPC201 Low Voltage Disconnect - 200 AMP


    InPower’s Model LVD20 Series Low Voltage Disconnects (LVD) automatically disconnects 12 volt loads from the battery when the battery voltage drops below a critical level, leaving enough charge for the vehicle to be restarted.
    The LVD contains a solid-state disconnect switch that is rated for 100, 150 or 200 amps, and provides automatic fault shutdown protection for over current, short circuit, high temperature and loss of ground conditions. When the fault is cleared the control input voltage must be removed and re-applied to activate the disconnect switch.
    SKU IP-LVD-20-200-C-SPC201
    Model InPower LVD-20-200-C-SPC201
    Manufacturer InPower
    In Depth

    InPower LVD-20-200-C-SPC201 Low Voltage Disconnect - 200 AMP


  • Prevents excessive battery discharge by automatically disconnecting loads.
  • 100% solid-state design - No moving parts to cause arcing and electrical noise.
  • Automatic shutdown protection for short circuit, over current, loss of ground and high temperature.
  • Sealed construction is resistant to mechanical shock and vibration.
  • Compact size and low profile.
  • Protective Terminal Boot Option
    		•
    Specifications

    InPower LVD-20-200-C-SPC201 Low Voltage Disconnect - 200 AMP



  • Operating voltage: 9.5Vdc to 18.5Vdc
  • Standard shut off voltage is 11.5 Vdc for 60 seconds, but time and voltage settings are available
  • Ground studs provided for control and input to contactor
  • Power studs are stainless steel 3/8-16 with locking nuts provided
  • Size: 2.85 W X 4.35 L X 1.10 H
  • Over-current trip: 100-110% of rated capacity for 500 milliseconds
  • Loss of ground trip: 250 milliseconds
    		•

    Construction Equipment Wholesaler
    © 2007-2021 Summit Equipment Outlet, LLC. All Rights Reserved.