Skip to Store Area:

Construction Equipment

You Are Here:

Search Site

InPower Stand Alone Throttle Module For Ford 2020 Models - SAT-LDF20-02

Zoom Out
Zoom In

More Views

Click on image above to view full picture

InPower Stand Alone Throttle - SAT-LDF20-02

Model#: InPower SAT-LDF20-02

$116.67

SKU#: IP-SAT-LDF20-02

Add Items to Cart
  • | Add to Compare

    • InPower Stand Alone Throttle For Ford 2020 Models and Newer - SAT-LDF20-02


    InPower’s SAT-LDF20 Throttle provides high idle engine RPM control for vehicles with an SEIC connector on Ford F250-F550 and Ford Transits beginning in 2020. The SAT-LD has a blunt cut wire harness available if no SEIC connector is available for direct connect under the hood connection to available wiring. The LDF20 control module connects to the vehicle’s SEIC connector. The cable also includes blunt-cut wires for the operating mode inputs, RPM1, RPM2\Charge, and the speed adjustment whereas the SAT-LD has blunt cut wires for all interfaces.

  • SAT-LDF20 Cable connects to SEIC connector on vehicles so equipped and the SAT-LD has a fully blunt-cut harness for vehicles without
  • Operation of the two is identical, and the only differentiation is the harness
  • Low cost with fast and easy installation
  • Automatic charge protect and fixed speed modes
  • Adjustable RPM Speed Settings
  • LED status and diagnostic indicators
  • Customized functions are available


    • InPower Stand Alone Throttle For Ford 2020 Models and Up - SAT-LDF20-02



  • SAT-LDF20 Cable connects to SEIC connector on vehicles so equipped and the SAT-LD has a fully blunt-cut harness for vehicles without
  • Operation of the two is identical, and the only differentiation is the harness
  • Low cost with fast and easy installation
  • Automatic charge protect and fixed speed modes
  • Adjustable RPM Speed Settings
  • LED status and diagnostic indicators
  • Customized functions are available
    SKU IP-SAT-LDF20-02
    Model InPower SAT-LDF20-02
    Manufacturer InPower
    Specifications

    InPower Stand Alone Throttle For Ford 2020 Models and Up - SAT-LDF20-02



  • +12 volts: Sourced from SEIC connector (SAT-LDF) or from fused Ignition source SAT-LD
  • RPM1: +12 volts or ground as determined by software (see ordering guide)
  • RPM2: +12 volts or ground as determined by software (see ordering guide)
  • Ground: Sourced a Good Solid Battery Ground
  • Speed Adjust Input: Adjusts preset RPM to desired value between 900 and 3000 RPM - (SEIC Max), (Chassis and Engine Dependent). Connect to +12V to increment, GND to decrement (50RPM/Sec)
  • Dimensions: 3.17 L x 1.92 W x 0.79 H inches
    		•

    • Construction Equipment Wholesaler
    © 2007-2021 Summit Equipment Outlet, LLC. All Rights Reserved.