Skip to Store Area:

Construction Equipment

You Are Here:

Search Site

InPower ABS2-100 Auxiliary Battery Switch - 100 Amps - (200 AMP Shown)

Zoom Out
Zoom In

More Views

Click on image above to view full picture

InPower ABS2-100 Auxiliary Battery Switch

Model#: InPower ABS2-100

$153.47

SKU#: IP-ABS2-100

Add Items to Cart
  • | Add to Compare

    • InPower ABS2-100 Auxiliary Battery Switch - 100 Amps


    InPower’s ABS2 Series of Auxiliary Battery Switches are the ideal solution for charging and isolating an auxiliary battery from a vehicle’s chassis battery and alternator. InPower’s ABS2 Series is designed to replace outmoded battery isolators and unreliable mechanical battery separators.


    InPower ABS2-100 Auxiliary Battery Switch - 100 Amps



  • Superb Auxiliary Battery Isolation
  • Bidirectional Charging
  • Boost start the vehicle from the auxiliary battery if the chassis battery voltage is low
  • Solid state - no moving parts
  • Extremely efficient - No need for a massive heat sink
  • Over-current protection
    SKU IP-ABS2-100
    Model InPower ABS2-100
    Manufacturer InPower
    In Depth

    InPower ABS2-100 Auxiliary Battery Switch - 100 Amps


    The ABS2 uses InPower’s proven patented solid-state contactor technology, incorporating sophisticated microprocessor algorithms to monitor over-current and under-voltage sensing.
    The auxiliary battery is charged from the chassis battery and alternator, while the chassis battery is protected from auxiliary battery load discharge. Since the ABS2 is bidirectional, a charging device (such as a battery charger or genset) connected to the auxiliary battery can also supply charging current to the chassis battery when needed. A “boost start” feature allows both the auxiliary and chassis batteries to supply current to aid engine starting.
    InPower’s ABS2 Auxiliary Battery Switches are available in 100, 150, 175 and 200 amp models. To properly size your ABS2, first determine how much extra current is available from the chassis alternator. This is the maximum alternator output current less the minimum chassis load current. The difference is the maximum available auxiliary battery charging current. Select an ABS2 model with a capacity greater than this current.
    Specifications

    InPower ABS2-100 Auxiliary Battery Switch - 100 Amps



  • Maximum Current Rating: 100 AMPS
  • Logic Power Current: 5 mA
  • Operating Voltage Range: 3.0 VDC to +18.0 Volts
  • Weight: 0.60 Lbs.
  • Dimensions: 4.15 X 4.15 X 1.27 Inches
  • Power Terminals: 3/8-16 Stainless Steel with Stainless Steel Locking Nuts
  • Ground Connection: Ground Stud For Connection
    Power Terminal Torque: 10 to 15 Ft. Lbs.
    		•

    • Construction Equipment Wholesaler
    © 2007-2021 Summit Equipment Outlet, LLC. All Rights Reserved.