Skip to Store Area:

Construction Equipment

Concrete Barrier Lifters
You Are Here:

Search Site

Caldwell BLG-4.1/4 Barrier Grab Shown With Polyurethane Grip Pads

Zoom Out
Zoom In

More Views

Click on image above to view full picture

Caldwell BLG-4.1/4-DP Barrier Grab With Dog Point Grabs

Model#: Caldwell BLG-4.1/4-DP Barrier Grab

$0.00

SKU#: CW-BLG-4.1/4-DP

Equipment at the best prices
  • | Add to Compare

    • Caldwell BLG-4.1/4-DP Barrier Grab with Dog Point Alloy Steel Pads


    The Caldwell Barrier Grab has been an industry standard for over 20 years.

  • Rated Lifting Capacity: 8500 Lbs.
  • Minimum Grab Width: 6 Inches
  • Maximum Grab Width: 12 Inches
  • Grip Type: Dog Point Steel Pad
  • Self Weight: 602 Lbs.


    • Caldwell BLG-4.1/4-DP Concrete Barrier Grab



  • New, compact and rugged design holds up to the work environment where barriers are used.
  • Handles concrete barriers from 6 inch - 12 inch nominal width at the top of the barrier.
  • Stainless steel Auto-Latch.
  • Auto-Latch mounting insures proper alignment.
  • Locating assembly orientates tong on barrier without operator intervention and will pivot when grab is set on the ground.
  • Gripping pads pivot to conform with the load.
  • OPTIONAL: Replaceable polyurethane pads protect barrier.
  • Alloy steel dog-point pads bite into painted barrier surfaces (typical in coastal areas).
  • Centering guide cut out on grab shoe helps to properly center tong over barrier for a level lift.
  • Extended handles on each side keep operator away from load and can be adjusted as needed.
  • Lifting eye allows for easy hook attachment, self-centers rigging, and will accommodate a fork.
    SKU CW-BLG-4.1/4-DP
    Model Caldwell BLG-4.1/4-DP Barrier Grab
    Manufacturer Caldwell Lifting Solutions
    In Depth

    Caldwell BLG-4.1/4-DP Construction Barrier Lifter


    The Caldwell Barrier Grab has been an industry standard for over 20 years.
    Over the years, Caldwell has added sizes, increased capacity, improved grip range, and changed the feet to improve operation on their Barrier Lifters.
    Now, their experienced engineers have done it again - they have increased the grip ratio, reduced overall tong size, added ergonomic handles, refined the Auto-Latch operation and increased the ASME BTH service class to category 3.

    • Construction Equipment Wholesaler
    © 2007-2021 Summit Equipment Outlet, LLC. All Rights Reserved.